Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Improved magnetosensor for the detection of hydrogen peroxide and glucose

Journal of Solid State Electrochemistry - In this work, the use of neodymium electrodes as a basis for the immobilization of magnetite nanoparticles has been carried out. The sensitivity and...     

Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Differential Graded Bocses and A ∞ $A_{\infty }$ -Modules

Algebras and Representation Theory - We introduce and study the category of twisted modules over a triangular differential graded bocs. We show that in this category idempotents split, that it...     

Synthesis,characterization, and transport properties of Nafion-polypyrrole membrane for direct methanol fuel cell (DMFC) application

Journal of Solid State Electrochemistry - Due to their distinctive chemical, electronic, and environmental properties, polypyrrole is used as a blocking barrier for methanol leakage in direct...     

Chiral 7-Oxabicyclo[2.2.1]heptane Building Blocks for Prostanoids

Russian Journal of Organic Chemistry - Methyl (Z)-3-[(2R,3R,4S,5S)-5-(2-methoxy-2-oxoethyl)-3,4-(isopropylidenedioxy)tetrahydrofuran-2-yl]-prop-2-enoate was synthesized, and its intramolecular...     

Plasma Crystal in (3 + 1) Dimensions

JETP Letters - A quasi-two-dimensional plasma crystal in (3 + 1) dimensions has been experimentally observed for the first time; i.e., three spatial coordinates of each microparticles of the...     

Recent advances and challenges in the recovery and purification of cellular exosomes

Exosomes are nanovesicles secreted by most cellular types that carry important biochemical compounds throughout the body with different purposes, playing a preponderant role in cellular communication. Because of their structure, physicochemical properties and stability, recent studies are focusing in their use as nanocarriers for different therapeutic compounds for the treatment of different diseases ranging from cancer to Parkinson's disease. However, current bioseparation protocols and methodologies are selected based on the final exosome application or intended use and present both advantages and disadvantages when compared among them. In this context, this review aims to present the most important technologies available for exosome isolation while discussing their advantages and disadvantages and the possibilities of being combined with other strategies. This is critical since the development of novel exosome‐based therapeutic strategies will be constrained to the effectiveness and yield of the selected downstream purification methodologies for which a thorough understanding of the available technological resources is needed.